UNIVERGE SV8100
R
S
7
ACK
ECTION
7.1
System Hardware Manual
M
OUNTING THE
Rack Mounting the 19" (CHS2U-US) Chassis
A single or multiple chassis can be rack mounted. Controlling and Expansion
chassis can be racked mounted by stacking them horizontally.
1.
The 19" chassis requires two rack mount brackets per chassis for
mounting. Each 19" chassis requires its own set of rack mount
bracket(s). Refer to
Stacking additional chassis (without rack mount
brackets) on top of one rack mounted chassis is not
recommended.
Figure 3-94 CHS2U-US Rack Mount Brackets
2.
Line up the Rack Mount Bracket(s) with the pre-drilled holes on each
side of the 19" chassis.
3.
Secure the brackets to the chassis using the supplied screws. Refer to
Figure 3-95 Rack Mount Bracket Installed 19" CHS2U-US on page 3-82
for the 19" chassis.
C
HASSIS
Figure 3-94 CHS2U-US Rack Mount
Issue 2.0
Brackets.
3 - 81