Install The Pz-Bs11 Expansion Blade In The Chs2U-Us Expansion Chassis; Figure 3-11 Pz-Bs10 Blade Installed; Figure 3-12 Pz-Bs10 Installed (Cover Closed) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
9. Close the PZ-BS10 cover.

Figure 3-12 PZ-BS10 Installed (Cover Closed)

3.3.2.3 Install the PZ-BS11 Expansion Blade in the CHS2U-US
Expansion Chassis

For the Expansion Chassis to function, the PZ-BS10 blade
must be installed in Controlling Chassis.
Do not remove or install this blade with
the power on.
1. Ensure the chassis is powered down.

Figure 3-11 PZ-BS10 Blade Installed

Issue 2.0
3 - 13