UNIVERGE SV8100
5.6
System Hardware Manual
Make sure the wall material can support the weight of the base and
handset.
Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1.
Insert two mounting screws into the wall (with their appropriate
anchoring device), 3 & 15/16 inches apart. Allow about 1/8 of an inch
between the wall and screw heads for mounting the telephone.
2.
Refer to
5.4 Mount the Base Unit on a Standard Wall Plate
the telephone.
Connecting the Charger
1.
Connect the AC adapter to the DC IN 9V jack and to a standard 120V
AC wall outlet.
Figure 6-34 Install the Mounting Screws
Figure 6-35 Connecting the Charger
Issue 2.0
for mounting
6 - 29