Figure 3-72 9.5" Mounting Brackets And Metal Expansion Fitting - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual

Figure 3-72 9.5" Mounting Brackets and Metal Expansion Fitting

4. Secure the bracket halves to the expansion fitting using the
four supplied screws (refer to
Brackets and Metal Expansion
5. Turn bracket assembly over and remove the screws holding
two brackets in the shipped position (refer to
Brackets Secured in Mounting Position with Screws on page
3-64).
Figure 3-72 9.5" Mounting
Fitting).
Figure 3-73
Issue 2.0
3 - 63