Installation - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
The IPLA daughter board provides:
32 (PZ-32IPLA) channels

64 (PZ-64IPLA) channels

128 (PZ-128IPLA) channels

Refer to the following tables for maximum upgrade capacities of the
PZ-32IPLA PZ-64IPLA
/
Table 2-6 SV8100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-13
Table 2-7 SV8100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-15
When installing an IPLA daughter board, the system allocates the
maximum number of trunk ports for the blade being installed.
3.4.2

Installation

To install a PZ-32IPLA/PZ-64IPLA/PZ-128IPLA on the
CD-CP00-US:
Do not remove or install the CD-CP00-US with
the power on.
1. Turn off system power, and remove the CD-CP00-US.
2. Install the IPLA daughter board on the CD-CP00-US blade.
3. Insert the CD-CP00-US into slot 1 in the Controlling Chassis.
 Refer to
3-8
4. Connect the IPLA daughter board to the CD-RTB or to an
external switching hub using an ethernet cable.
5. Refer to the UNIVERGE SV8100 Programming Manual for
detailed programming instructions.
3.4.3 Switch Settings
This daughter board does not have any switch that needs to be set
and does not require any hardware setting.
PZ-128IPLA daughter board:
/
Figure 3-3 19" Controlling Chassis – Guides Slot 1 on page
for more details.
Issue 2.0
4 - 33