Issue 2.0
4.12
5 - 52
Wall Mounting the Multiline Terminal
You can wall mount a DT300/DT700 Series connection multiline terminal
using the base cover or an optional wall mount unit. A wall mount unit must be
used if adapters are installed on the multiline terminal.
When optional adapters are used, the multiline terminal must be installed on the wall using
the WM-L UNIT (refer to
4.12.1
Wall Mounting a Multiline Terminal using the Base Plate
4.12.1.1
Adjusting the Hanger Hook
1.
2.
3.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
5.2.7 WM-L UNIT on page
Remove the hook from the unit.
Hanger Hook
Figure 5-50
Removing the Hanger Hook on a
DT300/DT700 Series Terminal
Turn the hook with the tab toward the top.
Slide the hook until it glides into position forming the
hanger hook for the handset.
Figure 5-51 Sliding the Hanger Hook into Position
UNIVERGE SV8100
5-74).