Figure 6-78 Installing Wood Screws; Figure 6-79 Change Handset Hanger - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6 - 64

Figure 6-78 Installing Wood Screws

2. Remove the Bluetooth hanger from the cradle.
 With a screwdriver, pry from the bottom, and lift the handset hanger
from the cradle.
3. Rotate the hanger top to bottom. Slide it downward in the
hollow until it clicks into position.

Figure 6-79 Change Handset Hanger

UNIVERGE SV8100
Installing SV8100 Cordless Telephones