NEC Univerge SV8100 System Hardware Manual page 560

Issue 2.0
2.5
8 - 4
Table 8-2 Conference Max Programming Options (Continued)
Menu Option Key
Flash 3
Duration
Local Number 4

Conference  5
Service  6
Country 7
 Press CLEAR to return the previous menu. Press and hold to exit programming
without saving changes.
 Press and hold 1 to enter hyphen or
before entering a new number.
Compliance
This product is in compliance with the following regulations and requirements:
FCC Part 15/ICES-003

This product has been tested and complies with the limits for a Class A
digital device.
 FCC Part 68
US:FBIMT01B910158015 Ringer Equivalence Number (REN):0.1B(ac)
Industry of Canada (IC)

IC: 1970A-158015: REN:0.1B(ac)
Programming
Press REDIAL. The current duration flashes. Press 1~5
to select duration as follows:
1 = 600 ms
2 = 300 ms
3 = 150 ms
4 = 100 ms
5 = 80 ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number that you
want displayed on the LCD in standby mode. Press
REDIAL to save the number.
Press REDIAL. Enter the telephone number you want
the conference key to dial. Press REDIAL to save the
number.
Press REDIAL. Enter the telephone number you want the
O key to dial. Press REDIAL to save the number.
Press REDIAL. Press number key for country as follows:
1 US/Canada/China/Japan/Mexico/Singapore
2 Europe CTR 21
3 Australia
4 S. Africa
5 Brazil
6 New Zealand
7 South Korea
Press REDIAL to save the country setting.
 to enter a space in the number. Press CLEAR
Installing SV8100 Conference Solutions
UNIVERGE SV8100