Figure 5-84 Wall Mount Spacing Guide (Wm-L Unit) - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
5 - 74
5.2.7 WM-L UNIT
The WM-L UNIT (Wall Mount Unit) is used to attach any DT300/
DT700 Series multiline terminal to the wall. This unit connects to the
bottom of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall using the WM-L UNIT.
5.2.7.1 Mount Multiline Terminal on Wall using WM-L UNIT
Use the template shown in
Spacing Guide (WM-L UNIT) on page 5-74
spacing before drilling.

Figure 5-84 Wall Mount Spacing Guide (WM-L UNIT)

1.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Attach the WM-L UNIT to the wall using six screws
or, using two wall mounted screws (refer to
5-85 Attach WM-L UNIT Using Screws on page
5-75).
UNIVERGE SV8100
Figure 5-84 Wall Mount
for required
Figure