Figure 5-70 Ribbon Cable Connector - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3. Remove the screw (refer to
Side Panel from Multiline Terminal on page
4. Carefully, return the multiline terminal to the buttons
side up.
5. Remove the Softkeys and Line Key kit from the
telephone.
6. Gently lift the small black bar to open the ribbon
cable connector.

Figure 5-70 Ribbon Cable Connector

7. Plug ribbon cable on back of 8LKI (LD)-L UNIT into
connector (metal side down) until pressure is felt.
8. Press down on the black bar to lock the cable into
place (refer to Figure 5-71 Ribbon Cable Installed
on page 5-66).
Issue 2.0
Figure 5-69 Remove
5-64).
Lift
Here
5 - 65