Figure 3-117 Installing Battery Connection Cable; Figure 3-118 Connecting Battery Cables - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
9. Install batteries into Battery Tray. Refer to
Installing Battery Connection
10. Using two screws, install the Battery Tray Bracket. Refer to
Figure 3-115 Removing Battery Tray Bracket on page

Figure 3-117 Installing Battery Connection Cable

11. Insert Battery Connection Cable into cable guides. Refer to
Figure 3-117 Installing Battery Connection
12. Install the Battery Tray Cover and tighten the two screws.
Refer to Figure 3-117 Installing Battery Connection
13. Slide the Battery Trays into the CHS LARGE BATT BOX.
14. Install the Battery Tray Suppressor while pulling the Battery
Connection Cable(s) through the cutouts provided. Refer to
Figure 3-118 Connecting Battery Cables on page
with two screws.
15. Plug the Battery Connection Cable(s) into the Fuse Unit. Refer
to Figure 3-118 Connecting Battery Cables on page
Figure 3-117
Cable.
Cable.
3-98. Secure
Issue 2.0
3-96.
Cable.
3-98.
3 - 97