Figure 10-30 Removing The Cutout; Figure 10-31 Bundling The Line Cord; Wall Mounting The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
11.1.2

Wall Mounting the Multiline Terminal

1. Extend and remove the base cover from the telephone. Refer
to Section 10 Removing or Installing the Base Plate on a
Multiline
2. Remove cutout shown in
3. Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest as shown in
the Line
Terminal.
Figure 10-30 Removing the

Figure 10-30 Removing the Cutout

Cord.

Figure 10-31 Bundling the Line Cord

Issue 2.0
Cutout.
Figure 10-31 Bundling
10 - 23