Figure 5-104 Itl / Dtl Ptt Handset; Figure 5-105 Installing The Utr-1-1 Usb Handset Cable - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6.3
5 - 86
Using the PTT handset on an NEC digital or IP terminal prevents
eavesdropping and eliminates the worry that privileged information could be
transmitted without user authority. These handsets are also an ideal solution
to filter unwanted audio transmissions from environments with ambient
background noise.
UTR-1-1 USB Handset
The NEC USB telephone can be plugged directly into a PC USB port, enabling
the high quality voice input and output abilities of a standard desktop
telephone. By connecting it to the USB port of a computer, calls can
immediately be made and received using a SoftPhone without installation of
additional software drivers.
The physical design eliminates stress associated with holding the handset
between the ear and and shoulder. The user immediately hears a dial tone
after taking the handset off-hook, eliminating the need to click on/off hook
icons in a PC application when making a call.
6.3.1 Handset Connection
Plug the handset cable (RJ-11 connector) into the bottom of the
cradle. Route the handset cable in the handset groove.

Figure 5-105 Installing the UTR-1-1 USB Handset Cable

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 5-104 ITL / DTL PTT Handset

UNIVERGE SV8100