Option 1 – Wall Mount Bracket (Standard) To Wall - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
3 - 48
Figure 3-56 Wall Mount Spacing Guide (9.5" Chassis)
4.2.1 Option 1 – Wall Mount Bracket (Standard) to Wall
1. Use the template shown in
Guide (9.5" Chassis)
2. Mark and drill four holes
3. Align the bracket halves with the precut holes in the metal
expansion fitting provided (refer to
Brackets and Metal Expansion Fitting on page
Figure 3-56 Wall Mount Spacing
for required spacing before drilling.
Plywood should first be installed on the wall
where the chassis will be positioned. This
allows secure anchoring of the screws which
support the weight of the chassis.
UNIVERGE SV8100
Figure 3-57 9.5" Mounting
3-49).
Installing the SV8100 Chassis