Selecting An Installation Location - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Selecting an Installation Location

Select a location to avoid excessive heat or humidity. The base unit should be

placed on a desk or tabletop near a standard 120 Vac outlet and within reach

of the telephone line connection on the UNIVERGE SV8100 multiline terminal.

Keep the base unit and the handset away from sources of electrical noise (e.g.

fluorescent lighting).

Connecting the Telephone Cords

Cordless II terminal is connected to the telephone line and to the

host telephone using two telephone line jacks on the back of the Base Unit:

LINE IN and LINE OUT.

Observe the following warnings during installation:

Never install telephone wiring during a lightning storm.

Never touch uninsulated telephone wires or terminals unless the telephone

line is disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Figure 6-4 D