Figure 6-38 Connecting Telephone Cords To The Telephone Jack - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
6.3
6 - 32
Connecting the Telephone Cords
When connecting the telephone cords, observe the following precautions.
Never install telephone wiring during a lightning

storm.
Never touch bare telephone wires or terminals unless

the telephone line is disconnected at the network
interface.
Use caution when installing or modifying telephone

lines.
To connect the telephone cords:
1. Connect the cord from the telephone jack to the Line In on the D
Cordless DECT.

Figure 6-38 Connecting Telephone Cords to the Telephone Jack

2. Connect a qualified NEC digital multiline terminal to the D
DECT.
UNIVERGE SV8100
Installing SV8100 Cordless Telephones
term
term
Cordless