Figure 5-47 Attach Tilt Legs To Dt300/Dt700 Series Terminal; Figure 5-48 Connecting The Tilt Legs; Install Tilt Legs - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
5 - 50
4. Lift and remove the Tilt Legs.
4.11.2

Install Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Lay the adjustable Tilt legs on top of the telephone. Refer to
Figure 5-47 Attach Tilt Legs to DT300/DT700 Series

Figure 5-47 Attach Tilt Legs to DT300/DT700 Series Terminal

3. Push the Tilt Legs upward until they snap into place.
4. Lift both ends of Tilt Legs until they come together (refer to
Figure 5-48 Connecting the Tilt Legs on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100
Terminal.
5-51).