Figure 10-13 Connecting The Dcr Console To A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
S 4 C
ECTION ONNECTING THE
An Attendant DCR-60-1 Console can be attached to a multiline terminal using the
following procedure.
1.
2.
3.
System Hardware Manual
A
TTENDANT
Place the multiline terminal and the Attendant Console face down.
Using the joining plate provided with the Attendant Console, attach the plate to
the multiline terminal and the Attendant Console.

Figure 10-13 Connecting the DCR Console to a Multiline Terminal

Connect the line cord and the AC adapter to the indicated locations on the
bottom of the Attendant Console.
Figure 10-14 Connecting the Line Cord and AC Adapter when Installing a DCR
Attendant Console
C M
ONSOLE TO A ULTILINE
Issue 2.0
T
ERMINAL
Line Cord Jack
AC Adapter Plug
10 - 13