Table 4-51 Cd-Etia Led Indications; Unmanaged Switch Functions - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
4 - 114
2. User removes Add-on board and moves it to slot 6.
3. User relocates the Main board to slot 4.
The grouping of the three GSWU units to form a 20 port
switch is restricted to reside in a single system location. The
grouping is not allowed where the GSWU units are placed
as part of the NetLink feature in the Univerge SV8100
system.
6.5.2.5

Unmanaged Switch Functions

In the unmanaged mode, a GSWU unit has the following
functions only:


6.5.3 LED Indications
1000Mbps Link
10/100Mbps Link
No Link
Port Activity
6.5.4 Connectors
Backplane Connector – J1 connection to system CPU board and
other boards in the chassis.
 The re-inserted board automatically gets ports
17 ~ 24 (9 ~ 16 are unavailable)

User can erase the ports 9 ~ 16.

Then reinsert the board in slot 6 to get ports 9 ~ 16.
None of the port numbers change. However, the

programming in Program 10-55 must be changed to
reflect this move
Base-TX
10 Base-T/100
(x8)
PoE Class 3 (lowest power class)

Table 4-51 CD-ETIA LED Indications

Port State
UNIVERGE SV8100
Base-T
/1000 ) Ethernet ports
LED Display
Green Solid
Yellow Solid
Off
LED Blinking
Installing the SV8100 Blades