Figure 10-28 Removing The Hanger Hook On A Multiline Terminal; Figure 10-29 Sliding The Hanger Hook Into Position; Wall Mounting A Multiline Terminal Using The Base Plate - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
S 11 W
ECTION ALL
You can wall mount a DTH/DTR connection multiline terminal (except for DTR-2D-1
TEL) using the base cover or an optional wall mount unit. A wall mount unit must be
used if adapters are installed on the multiline terminal.
11.1
10 - 22
M M
OUNTING ULTILINE

Wall Mounting a Multiline Terminal using the Base Plate

11.1.1 Adjusting the Hanger Hook
1. Remove the hook from the unit.
Hanger Hook

Figure 10-28 Removing the Hanger Hook on a Multiline Terminal

2. Turn the hook with the tab toward the top.
3. Slide the hook until it glides into position forming the hanger
hook for the handset.
T
ERMINALS

Figure 10-29 Sliding the Hanger Hook into Position

Installing D
UNIVERGE SV8100
term
Series i Telephones