Night Mode Selector Switch - NEC Univerge SV8100 System Hardware Manual

Issue 2.0
N
S 9
IGHT
ECTION
9.1
9.2
T
S 10
ELEPHONE
ECTION
10.1
9 - 26
M S
ODE ELECTION

Night Mode Selector Switch

The Night Mode Switch relay closes when the system detects either an open
or closure on the MISC block NIGHT SW terminals. Maximum 48v DC is
output to the switch when open, and 7mA DC when shorted.
Connecting a Night Mode Selector Switch
1. Connect an RJ-61 modular line cord from the CN10 connector on the
CD-CP00-US to the appropriate location on the extension cross-connect
block.
2. Connect the two-conductor station cable from the cross-connect block to
the night switch mechanism output leads.
3. Install bridging clips as required.
L
ABELING
DESI Printer Sheets
Telephones can be easily labeled by removing the plastic faceplate. These
labels can be printed by hand, typewriter, or printing DESI labels. Labels for
this are on 8 1/2 x 11" paper, which allows for easy printing by any printer –
dot matrix, laser, etc.
DESI Printer Sheets are available for the following:
 Economy 2E – DESI ITL/DTL-2E (25 PKG)
Economy 6DE – DESI ITL/DTL-6DE (25 PKG)

 All Value Telephones – DESI ITL/DTL-12D/24D (25 PKG)
8LK – DESI ITL/DTL 8LK (25 PKG)

60 DSS – DESI DCL-60 (25 PKG)

 Clear Side Panel – DESI ITL/DTL-SIDE (25 PKG)
LCD Value, Clear Side – DESI ITL/DTL-SIDE-LCDV (25 PKG)

UNIVERGE SV8100
Installing SV8100 Optional Equipment