Figure 5-45 Separating The Tilt Legs; Figure 5-46 Removing Tilt Legs From Multiline Terminal; Removing Or Installing The Tilt Legs On The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.11
System Hardware Manual

Removing or Installing the Tilt Legs on the Multiline Terminal

The Tilt Legs can be removed or installed on the DT300/DT700 Series
multiline terminal.
4.11.1 Remove Tilt Legs
1. Place the telephone on a flat surface (button side down).
2. Separate the Tilt Legs and place them flat against the
telephone. Refer to
3. Push downward (two arrows) and slide downward (refer to
Figure 5-46 Removing Tilt Legs from Multiline

Figure 5-46 Removing Tilt Legs from Multiline Terminal

Figure 5-45 Separating the Tilt

Figure 5-45 Separating the Tilt Legs

Issue 2.0
Legs.
Terminal).
5 - 49