NEC Univerge SV8100 System Hardware Manual page 622

Issue 2.0
9 - 54
15. Ignore Calls – although the Recorder Starts
recording automatically, this setting tells the system
only to Save calls longer than this preset threshold.
16. Automatically Erase Calls – this can be set to
delete calls after x number of days or after a defined
disk space is used.
 Calls marked Important during playback are not
automatically deleted.
17. Press OK to save the settings.
18. Repeat this procedure for each listed device,
entering a name and identifying the folder for storing
recorded calls.
 Calls should be stored on the same PC. However, if a
network drive is used, you should choose a folder
location on the local PC to buffer calls. This allows the
application to run and store calls even if the network is
temporarily down.
19. When all the devices are named and mapped to a
storage folder location, select File then Exit from
the Recorder screen menu to save your
configuration.
The NEC Recorder now records every call to and
from the telephones. It is important to use proper
procedure to shut down the application and PC
when necessary.
 The Recorder PC should be be left on at all times (with
battery backup) and the application always running.
Installing SV8100 Optional Equipment
UNIVERGE SV8100