Figure 9-51 Install Ada-L Unit; Ada-L Unit Connection - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
8. Return tilt leg to original position.
9. Reconnect all cables previously disconnected.
12.3.3

ADA-L UNIT Connection

12.3.3.1 ADA-L UNIT Connection for Recording Only
1.
2.

Figure 9-51 Install ADA-L UNIT

The mini-plug connection cord should not use an
attenuator and have a monaural (single ring)
mini-plug connection for normal recording.
Set the ADA-L UNIT DSW switches (Refer to
9-48 ADA-L UNIT on page
Set DSW 6 to ON.

DSW switch 5 is used to change

the output level from the OUT
jack of the ADA-L UNIT
(On = Low, Off = High).
Using the mini-plug connection cord, connect the
the ADA-L UNIT Out jack to the cassette recorder
MIC jack (Refer to
Connection on page
9-72).
Figure 9-52 ADA-L OUT Jack
9-76).
Issue 2.0
Figure
9 - 75