Presetting Of The Voip Channels - Auerswald COMpact 5200 Advanced Information

Presetting of the VoIP Channels

Presetting of the VoIP Channels
Proceed as follows:
Using the Configuration Manager (page Administration >
•
Configuration VoIP)
Requirements:
• VoIP channels (optional, see Technical Data in the Instructions)
Mode de fonctionnement VoIP
Classique
This operating mode is basically selected after commissioning or after
a firmware update and corresponds to the options prior to updating to
firmware 7.4A.
Mixte
Channel assignment in each case half with classic telephony (analogue/
ISDN) and VoIP telephony. Provides a maximisation of the provided VoIP
channels with full availability of classic communication technologies.
Broadband (only COMpact 5500)
Priority is given the use of broadband codecs for the best possible VoIP
call quality.
VoIP oriented (only COMpact 5500)
Priority is given to a higher number of available VoIP channels. Provides
minimal support for classic communication technologies, for example for
integrating fax machines or door terminals.
VoIP maximum
The operating mode with the highest possible number of available VoIP
channels. No classic telephony is possible (analogue/ISDN).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1177 -