Required Equipment; Cabling Considerations - Cisco o UCS X440p Installation And Service Manual

Required Equipment

•
Required Equipment
To remove Type A and Type B risers, you need a #2 Phillips screwdriver. For information about the riser
types, see

Cabling Considerations

Riser Cage Cables
The PCIe node has two dark colored GPU cables that carry power and data.
• One cable, the power cable, connects from the PCIe riser cage to the base PCBA connector. This cable
• One cable, the MCIO cable, connects from the PCIe riser cage to the rear mezzanine PCBA. This cable
Figure 5: PCB Cable Connectors, FHFL GPU
Cisco UCS X440p PCIe Node Installation and Service Guide
20
Installing Riser, Type B, on page 25
Riser Cage Options, on page
is shown in red in the following image.
is shown in blue in the following image.
4.
Servicing the Cisco UCS X440p PCIe Node