Advertisement
3
Upgrade the Cisco CTE 1400 Series Software
If you are installing a new device, rather than an upgrade, skip this section.
Requirements
To upgrade to Release 2.7, you need the Release 2.7 Restore CD-ROM.
Note
Be aware that an upgrade is a complete new installation, and it will overwrite any previous
CTE settings.
Upgrade Procedure
To upgrade your CTE, perform these steps:
Step 1
Make sure that a PC capable of hosting terminal emulation software is connected to the CTE;
power on both systems.
Step 2
Insert the CTE Release 2.7 Restore CD into the CD-ROM drive of the CTE.
Step 3
Power down the CTE.
Step 4
Wait 10 seconds.
Step 5
Power on the CTE.
Step 6
When the installation has completed, the serial console displays the message "Installation
successful."
Step 7
When the upgrade is complete, eject the Restore CD and reboot the CTE.
Step 8
When the CTE restarts, the CTE serial console opens.
Next
You are now ready to configure the CTE with your network.
4
Advertisement
