6E-8 STEERING COLUMN
MAINTENANCE AND REPAIR
YAD6E070
YAD6E080
YAD6E090
ON-VEHICLE SERVICE
STEERING COLUMN
Removal
1. Disconnect the negative terminal of battery and
place the tires in front straight direction.
2. Untighten the fixing screw in the left/right of
steering wheel and remove the horn pad (airbag
module assembly) in the wheel.
At this time, remove the airbag module connector
simultaneously.
3. Untighten the wheel fixing nuts and remove the
steering wheel using the special tool.
Notice:
•
When you remove the wheel, be sure to do
alignment mark in column shaft and wheel.
•
Remove the remote control switch connector
(airbag connector, horn connector)
4. Remove the fuel filler door release cable, hood
release cable, side mirror switch.
SSANGYONG Y200