SSANGYONG Y200 Manual page 1975

DI02-14
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Intake/Exhaust - Removal/Installation
1. Remove the cylinder head assembly.
Y220_02039
2. Install the removed cylinder head on the assembly board
(special tool) and set the supporting bar and lever (special
tool) on the cylinder head.
Y220_02040
3. Push the valve spring seat down with the lever and remove
the valve cotter, valve seat and valve spring.
Y220_02041
4. Remove the valves from the cylinder head.
Y220_02042
ENGINE HOUSING
DI ENG SM - 2004.4