Kickdown Switch; Transmission Control Module - SSANGYONG Y200 Manual

SSANGYONG Y200
AUTOMATIC TRANSMISSION 5A-205

KICKDOWN SWITCH

1. Separate the Kickdown Switch from the Kickdown
Switch bracket by pushing the lock.
2. Disconnect the Kickdown Switch connector.
3. Installation should follow the removal procedure in
the reverse order.
KAA5A5S0
TRANSMISSION CONTROL
MODULE
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Push the driver's seat and disconnect the
transmission control module connector.
YAD5A160
3. Removal the TCM mounting bolts and TCM.
Installation Notice
Tightening Torque
YAD5A170
4. Installation should follow the removal procedure in
the reverse order.
YAD5A180
10 N•m (89 lb-ft)