9D-26 BODY ELECTRICAL
3. Mark installing mark on the wheel nut, release
wheel nut.
4. Using the special tool, remove steering wheel.
Notice: Separate all the connector.
YAD9D490
5. Separate cover equipped in the steering column
shaft.
YAD9D500
6. Separate vacuum hose of fuel cut and connector
which is linked to switch of multi- function.
7. After separating coil connector of air bag contact,
remove contact coil.
YAD9D510
8. Remove switch of multi- function.
9. Install reverse order of removal.
YAD9D520
SSANGYONG Y200