SSANGYONG Y200 Manual page 1165

5A-70 AUTOMATIC TRANSMISSION
DTC P0790 Normal/Performance Switch Circuit Malfunction (Cont'd)
Step
Replace the mode switch. Refer to Shift Control Lever
in this section.
11
Is the action complete?
1. Turn the ignition OFF.
2. Replace the TCM.
12
Is the action complete?
1. Using the scan tool, clear the DTCs.
2. Road test the vehicle within the conditions for
setting this DTC as specified in the text.
13
Does the scan tool indicate that this diagnostic has
run and passed?
Check if any DTCs are set.
14 Are there any DTCs displayed or previously recorded
at Step 2 that have not been diagnosed?
Action Value(s) Yes
- Go to Step 13
- Go to Step 13
- Go to Step 14
Go to
applicable
- DTC table
No
-
-
Go to Step 2
System OK,
Check
Complete
SSANGYONG Y200