SSANGYONG Y200 Manual page 1289

5A-194 AUTOMATIC TRANSMISSION
Valve Body
Notice:
•
Do not wash the nose of solenoids in solvent.
•
Be aware of ball positions in the upper valve body.
•
Be aware of 1-2 and 3-4 shift valve positions, they
can be swapped.
•
Check the 4-3 sequence valve and spring
orientation.
•
Check that the 12 mm ball is in the lower body.
•
Check the line pressure relief valve for swarf, and
be aware of replacing the shims.
•
When servicing the transmission, ensure that the
solenoid 5 damper spring is not broken.
•
Locate the detent spring central to the detent lever.
•
Wash the upper and lower valve bodies thoroughly
with cleansing solvent and blow dry.
•
Check the valve body cavities, ports and holes for
damage or obstructions.
•
The orifices in the valve body are for stability and
safeguard. Do not drill them larger.
•
Thoroughly wash all loose components.
•
Check that all valves slide freely in their location.
1. Install the detent lever locating pin
2. Install the Band Apply Regulator (BAR) valve,
springs, plunger and retaining pin.
KAA5A1O0
3. Install the line pressure relief valve, tapered end
first, spring and disc. Secure with the retaining pin.
KAA5A1P0
SSANGYONG Y200