Power Steering Gear Preload Adjustment; Oil Change - SSANGYONG Y200 Manual

6A-8 POWER STEERING
POWER STEERING GEAR
PRELOAD ADJUSTMENT
1. Place the steering wheel in front direction.
2. Lift the vehicle using the lifter safely.
3. Remove the adjustment plug lock nut.
4. Measure the torque of adjustment plug.
YAD6A050
5. If torque is excessive or too little, adjust it as
specified value.
•
•
•
•
•
•
6. Tighten the adjustment plug lock nut.
YAD6A060

OIL CHANGE

1. Lift the vehicle slightly using the lifter.
2. Separate the oil supply hose from the power
steering pump.
3. Discharge the oil in the oil tank.
4. Connect the oil supply hose with the power
steering pump.
5. Separate the oil return line from the oil tank.
MAX
MIN
6. Remove the high pressure cable in the ignition
coil.
7. Operating the ignition motor periodically, turn the
YAD6A070
steering wheel from lock to lock and discharge
the oil through the return line.
8. Connect the return line with the oil tank.
9. Charge the oil in the oil tank as specified quantity.
10. Do bleeding procedure.
Place the rack gear in center position.
Tighten the adjustment plug by 100 kg.cm
Turn the pinion gear in order that rack gear move
to the left/right end five times.
Remove the adjustment plug.
Tighten the adjustment plug by 45 - 55 kg.cm
Tighten the adjustment plug by 67.5° to C.C.W
direction.
SSANGYONG Y200