Table of Contents
Advertisement
Test Description
The number(s) below refer to the step number(s) on
the Diagnostic Table.
DTC P0707 Transmission Range Sensor Circuit High Input
Step
Perform a Transmission Control Module (TCM)
Diagnostic System Check.
1
Is the check performed?
1. Turn the ignition ON, with the engine OFF.
2. Install a scan tool.
3. Record and then clear DTCs.
2
4. Operate the vehicle within the conditions for
setting this DTC as specified in the text.
5. Review the TR Sensor value on the scan tool.
Is the TR Sensor value greater than the specified value?
1. Turn the ignition OFF.
2. Disconnect the Transmission Range (TR) sensor
connector.
3. Turn the ignition ON.
3
4. With a test light connected to ground, probe the
TR sensor signal circuit at terminal 2.
Is the TR sensor value less than specified value?
With a test light connected to B+, probe the TR
sensor ground circuit at terminal 1.
4
Does the test light illuminate?
Check for a poor connection at the TR sensor connector
and repair the malfunctioning terminals as necessary.
5
Is a repair necessary?
Replace the TR sensor.
6
Is the action complete?
1. Turn the ignition OFF.
2. Disconnect the Transmission Control Module (TCM)
connector B.
7
3. Check the TR sensor signal circuit at terminal 1 for an
open or short to voltage and repair as necessary.
Is a repair necessary?
Check the TR sensor ground circuit at terminal 1 for
an open and repair as necessary.
8
Is a repair necessary?
Check for a poor connection at the TCM connector
and repair the malfunctioning terminals as necessary.
9
Is a repair necessary?
1. Turn the ignition OFF.
10
2. Replace the TCM.
Is the action complete?
SSANGYONG Y200
Action
AUTOMATIC TRANSMISSION 5A-61
4. This step simulates a DTC P0707 condition. If the
scan tool displays the specified value, the TR
sensor signal circuit and the TCM are OK.
Value(s)
-
Go to Step 2
4.12 V
Go to Step 3
0.87 V
Go to Step 4
-
Go to Step 5
-
Go to Step 11
-
Go to Step 11
-
Go to Step 11
-
Go to Step 11
-
Go to Step 11
-
Go to Step 11
Yes
No
Go to "TCM
Diagnostic
System Check"
Go to
"Diagnostic
Aids"
Go to Step 7
Go to Step 8
Go to Step 6
-
Go to Step 9
Go to Step 9
Go to Step 10
-
Advertisement
Chapters
Table of Contents
