Assembly Procedure - SSANGYONG Y200 Manual

SSANGYONG Y200

ASSEMBLY PROCEDURE

•
Use special tools during assembly of oil seals and
bearings.
•
Lubricate bearings, oil seals and bushings before
assembly.
Transfer Case Assembly
1. If the ring gear was removed, align the outer
diameter of the new replaced ring gear with transfer
case and assemble it.
2. Insert the pin.
3. Insert the ball bearing to the case and install the
retaining ring.
4. Install the new oil seal by pressing into the case.
YAD5D750
5. Make sure that all parts are correctly and firmly
installed into the case.
YAD5D760
Electric Shift Cam Parts
1. Insert the spacer into torsion spring.
2. Insert the end of the shift shaft into the spacer
smoothly.
YAD5D770
PART TIME - T/C 5D1-35