5B-24 MANUAL TRANSMISSION
MAJOR UNIT
Disassembly Procedure
1. Remove the shift lever from the extension housing.
YAD5B470
2. Install the removed transmission into a fixture.
3. Remove the drain plug and drain the oil. Using a
10 mm wrench, remove the clamp bolt and position
the offset lever in the 3-4 position of neutral.
Notice: Removal of the offset lever in a position
other than 3-4 of neutral will be difficult.
YAD5B480
4. Using a pin punch and a hammer, remove the roll
pin to remove the shift lever from the offset lever.
5. Using a 15 mm wrench, remove the 8 bolts from
the extension housing.
YAD5B490
6. Separate the extension housing from the case and
shift cover.
Separate the offset lever from the shift.
Notice: Do not remove the offset lever while the
extension housing is still assembled to the case.
YAD5B500
UNIT REPAIR
SSANGYONG Y200