Table of Contents
Advertisement
DI01-48
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Engine - Disassembly and Reassembly
1. Unscrew the injector nozzle holder bolts (12-sided) and
remove the injector bracket.
Installation Notice
Tightening torque
Y220_01089
2. Remove the injectors with a injector extractor (special
tool).
Notice
• Be careful not to take off the sealing caps on the
injectors and fuel system.
• Replace the copper washers with new ones when
installing.
Y220_01090
3. If the copper washer is in injector hole, remove it with a
special tool as shown in the figure.
Y220_01092
9 ± 1.0 Nm,
190° + 10°
ENGINE ASSEMBLY
DI ENG SM - 2004.4
Advertisement
Chapters
Table of Contents
