SSANGYONG Y200 Manual page 1360

SSANGYONG Y200
MANUAL TRANSMISSION 5B-47
8. Check the following Bearing for excessive war:
•
Crankshaft pilot bushing for the front of the input
shaft.
•
Clutch release bearing.
•
Input shaft bearing.
•
Main shaft pilot bearing rollers.
•
Main shaft thrust Bearing and its surfaces.
YAD5B1J0
•
Speed gear roller bearing on the main shaft.
•
Main shaft rear bearing.
•
Counter shaft front and rear bearings.
YAD5B1K0
9. Check the gear tooth surfaces of all gear sets.
YAD5B1L0
10. Check the reverse gear set surfaces. Check the
surfaces of gear teeth for excessive wear, pitting,
scoring and spalling and replace if necessary.
YAD5B1M0