Table of Contents
Advertisement
DI02-54
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
8. While insert finger and push the chain guide backward
direction and turn the crankshaft pulley to ATDC 65° by
counter clockwise direction until feel the chain guide
inclined backward.
Y220_02139
9. Install a special tool into the cooling fan bracket hole to
hold the sprocket.
Y220_02140
10. Remove the sprocket bolts and center nut and after
slightly lifted up the chain, remove the pump sprocket.
Installation Notice
Tightening torque
Sprocket bolt
Y220_02141
11. Remove the HP pump bearing with HP pump bearing
puller (special tool).
Notice
Do not apply excessive force. The timing chain may
deviates.
Y220_02142
Center nut
Nm
20 Nm + 90°
65 ± 5 Nm
ENGINE HOUSING
DI ENG SM - 2004.4
Advertisement
Chapters
Table of Contents
