SSANGYONG Y200 Manual page 1339

5B-26 MANUAL TRANSMISSION
13. Using a needle nose pliers, remove the 5th-R lever
clip.
YAD5B550
14. Using a 21 mm wrench or a T-50 bit, remove the
5th-R lever pivot bolt.
Notice: Apply sealer bond to this bolt during
assembly.
YAD5B560
15. Using a 22 mm wrench, remove the back-up lamp
switch from the 5-R lever side.
Notice: Apply sealer to the threads.
16. Pull out the 5th-R lever out of the transmission.
YAD5B570
17. Using a snap ring pliers, remove the 5th
synchronizer snap ring from the end of the counter
shaft.
YAD5B580
SSANGYONG Y200