7B-20 GENERAL HVAC SYSTEM
RECEIVER-DRIER
Removal & Installation Procedure
1. Discharge and recover the refrigerant from the
system.
2. Remove the head lamp assembly.
YAD7B340
3. Disconnect refrigerant pressure sensor connector.
YAD7B350
4. Remove the receiver-drier.
•
Remove two flange nuts.
•
Remove the O-ring
YAD7B360
•
Remove the bracket bolt retaining the receiver-
drier and then remove the receiver-drier.
YAD7B370
SSANGYONG Y200