Table of Contents
Advertisement
4. Remove the glow plugs with a special tool.
Installation Notice
Tightening torque
5. Unscrew the Torx bolts and remove the common rail from
the engine.
Installation Notice
Tightening torque
Notice
Plug the openings with sealing cap.
6. Remove the booster sensor from the engine.
Installation Notice
Tightening torque
7. Unscrew the bolt and remove the camshaft position
sensor.
Installation Notice
Tightening torque
• Apply Loctite on the thread before installation.
ENGINE ASSEMBLY
DI ENG SM - 2004.4
15 ± 3 Nm
25 ± 2.5 Nm
10 ± 1.0 Nm
12 ± 1.7 Nm
DI01-49
Y220_01091
Y220_01087
Y220_01088
Y220_01093
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Advertisement
Chapters
Table of Contents
