SSANGYONG Y200 Manual page 1342

SSANGYONG Y200
MANUAL TRANSMISSION 5B-29
26. Remove the counter shaft as follows:
•
Using a punch and hammer, pry up the lock
tabs.
•
Using a 13 mm wrench or T-40 bit, remove the
4 bolts.
•
Remove the retainer and shim from the case.
•
Push the counter shaft rearward to remove the
rear bearing outer race.
YAD5B670
27. Using a pin punch and a hammer, remove the roll
pin fixed on the reverse idler shaft.
YAD5B680
28. By pushing the reverse idler shaft rearward and
out of the case, remove the reverse idler gear and
O-ring.
YAD5B690
29. Using a puller, remove the rear bearing assembly
from the counter shaft.
YAD5B700