SSANGYONG Y200 Manual page 1287

5A-192 AUTOMATIC TRANSMISSION
13. Install the converter clutch control valve, spring,
plug, and 'O' ring.
14. Install the retaining pin.
KAA5A1H0
15. Install the converter release check ball and spring.
16. Install the gasket on the pump cover.
KAA5A1J0
17. Install the cover plate, solenoid 7 with the retainer
and the solenoid wiring retainer to the pump cover,
ensuring that the periphery of the cover plate is
flush with the periphery of the pump cover.
18. Tighten the screws to specification in the order.
(1-5)
Installation Notice
Tightening Torque
19. Tighten the solenoid 7 screw.
Installation Notice
KAA5A1K0
Tightening Torque
•
Check that neither the wiring nor the connector
protrudes excessively, in order that at
assembly neither the wiring and the connector
contacts or rubs on the input shaft or the C1/
C2 clutch cylinder.
13-16 N•m (10-12 lb-ft)
13-16 N•m (10-12 lb-ft)
SSANGYONG Y200