SSANGYONG Y200 Manual page 1761

SSANGYONG Y200
Check Cable and Wire
1. Check looseness of the connecting and corrosion.
2. Check the corrosion of terminal and wire by the
eletrolyte.
3. Check open circuit for terminal and wire.
4. Check isolation of wire, damage, deformation.
5. Check interference between parts of terminal and
other metal parts.
YAD9D120
6. Check applying an electrical current complete
between fixing bolt and body on the section of
ground.
7. Check lay-out of wiring proper.
8. After fixing wiring completely, wiring should not
be contacting by section of sharpness, section of
high temp. (For example: exhaust manifold,
exhaust pipe).
9. Keep the clearance between wiring and fan- pully,
fan-belt, other parts.
10. After loosening wiring and fix, for vibration
between section of body and the section of engine.
YAD9D130
BODY ELECTRICAL 9D-5