SSANGYONG Y200 Manual page 1984

4. Install the intake and exhaust camshaft sprockets and
the timing chain.
Tightening torque
Notice
• If the sprocket bolt is stretched over 0.9 mm, replace
it with new one.
• Always install the intake camshaft sprocket first.
• Ensure that the markings on camshaft sprocket and
timing chain are aligned.
• Make sure that the timing chain is securely seated
on the guide rail.
5. Rotate the crankshaft pulley two revolutions and ensure
that the OT mark on the crankshaft pulley and the OT
mark on the camshaft pulley are aligned.
Notice
If the markings are not aligned, reinstall the cylinder
head.
6. Install the chain tensioner.
Tightening torque
ENGINE HOUSING
DI ENG SM - 2004.4
25 Nm + 90° + 10°
80 ± 8.0 Nm
DI02-23
Y220_02076
Y220_02077
Y220_02079
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN