SSANGYONG Y200 Manual page 1669

9A-2 GENERAL BODY
Application
Type
Hood
Structure
Front Door
Type of Regulator
Lock System
Structure
Rear Door
Type of Regulator
Lock System
Type
Tail Gate
Wind Shield
Thickness of
Front Door Glass
Glass
Rear Door Glass
Rear Fix Glass
Glass of Tail Gate
Type of Nozzle
Specification
of Test Water
Height of Nozzle
Leaking
Quantity of Injecting
Pressure
Position of a Piller Test Stand and
Wing Shield
Position of "B" Piller Test Stand
Position of Rear Decklid Test and Tail
Gate Glass
SPECIFICATION
Rear Hinge and Type of Front Opening, Gas Lifter
Front Hinge and Frame Door
Wire and Drum
Pin and Fork
Front Hinge and Frame Door
Wire and Drum
Pin and Fork
Internal Hinge, Gas Lifter
5 mm
4.0 mm
4.0 mm
4.0 mm
4.0 mm
Fixing Type
5.0 mm
Opening Type
Spray Nozzle of #1/2 GG-25 or Nozzle with Sloping
Angle 60° Equivalent
Keep Distance 1,600 mm from Ground
14L Per Mir
155kPa(22.5 psi): Checking Pressure from nozzle
Keep Injecting Water, 30° of Lower Direction and 45°
of Backwards, Approximately at the corner of Wind-
shield
Keep Injecting Water, 30° of Lower Direction and 45°
of Backwards, Approximately at the corner Line of
Rear Door.
Keep Injecting Water, 30° of Lower Direction and 45°
of Forwards, Approximately at Distance of 60mm to
the Corner of Rear Door
Specification
SSANGYONG Y200