SSANGYONG Y200
CLUTCH PEDAL
Removal & Installation Procedure
1. Remove the turn over spring from the clutch pedal.
YAD5C190
2. Remove the snap pin and the clevis pin from the
clutch master cylinder push rod and separate the
push rod and the clutch pedal.
YAD5C200
3. Remove the pedal mounting and nut from the
clutch pedal bracket and remove the pedal from
the bracket.
YAD5C210
4. Installation should follow the removal procedure
in the reverse order.
Perform the following procedure for installation.
•
Apply the grease to the clutch pedal clevis pin
and pedal bushing.
YAD5C220
CLUTCH 5C-13