SSANGYONG Y200 Manual page 1352

SSANGYONG Y200
MANUAL TRANSMISSION 5B-39
3. Remove the input bearing.
YAD5B0E0
4. Remove the input shaft seal.
5. Check and clean all removed parts and replace if
necessary.
YAD5B0F0
Assembly Procedure
1. Using a hydraulic press and installer, press the
input shaft bearing onto the input shaft.
2. Apply grease to the thrust bearing inner roller (15
rollers) and install the main shaft thrust bearing
and its race in the rear of the input shaft.
YAD5B0G0
3. Using a rubber hammer and installer, install the
input bearing retainer and input shaft seal after
applying grease.
4. Install the bearing outer race to the retainer without
end play adjusting shim.
YAD5B0H0